Ejector Pins (Large)

Our Large Ejector Pins are manufactured from centerless ground high carbon steel for maximum strength and wear resistance during casing ejection.  Each Large Ejector Pin is supplied with two standard and two jam nuts for easy pin installation and removal.  Large pins are used when castings have thick wall sections or when extreme ejection force is required.  Custom sizes available upon request.

816.540.2325
Product Number A B C Reamer Size
B99065 0.500″ 6″ 1/2 – 20 x 3 0.505″
B99066 0.500″ 7″ 1/2 – 20 x 3 0.505″
B99067 0.500″ 8″ 1/2 – 20 x 3 0.505″
B99068 0.500″ 9″ 1/2 – 20 x 3 0.505″
B99069 0.500″ 10″ 1/2 – 20 x 3 0.505″
B99070 0.500″ 11″ 1/2 – 20 x 3 0.505″
B99071 0.500″ 12″ 1/2 – 20 x 3 0.505″
B99072 0.500″ 13″ 1/2 – 20 x 3 0.505″
B99073 0.500″ 14″ 1/2 – 20 x 3 0.505″
B99080 0.625″ 8″ 5/8 – 18 x 3 0.630″
B99081 0.625″ 9″ 5/8 – 18 x 3 0.630″
B99082 0.625″ 10″ 5/8 – 18 x 3 0.630″
B99083 0.625″ 11″ 5/8 – 18 x 3 0.630″
B99084 0.625″ 12″ 5/8 – 18 x 3 0.630″
B99085 0.625″ 13″ 5/8 – 18 x 3 0.630″
B99086 0.625″ 14″ 5/8 – 18 x 3 0.630″
B99087 0.625″ 15″ 5/8 – 18 x 3 0.630″
B99088 0.625″ 16″ 5/8 – 18 x 3 0.630″
B73506 0.500″ 20″ 1/2 – 20 x 20 0.505″
B73507 0.500″ 22″ 1/2 – 20 x 22 0.505″
B73508 0.500″ 24″ 1/2 – 20 X 24 0.505″